Call now to get tree help suchlike tree cutter, tree clearance, bush felling, shrub felling, stump falling and many others all over United States


Call us

Call +1 (855) 280-15-30










We don't have all of our parts listed online yet, but give us a.

Jan 31, Volkswagen engineers designed a Bushing Puller for the 6 Volt Starter Bushing and another for the 12 Volt Bushing. Let’s look at the Kubota stump grinder attachment, 2025 Cohasset MA Location first. In order to do this, I have a VW transmission which has been gutted and cleaned for the purpose.

The first picture shows the Long-bodied Starter in place. Starter Bushing: Quantum, AudiPassat & Others VW starter bushing. Replacing the starter bushing is part installing a new starter in your Volkswagen. Sometimes a worn out bushing can also wear out on its own and cause your starter to misalign and appear to not work.

WV Code: Apr 07, Installation really is the reverse of removal. If installing a new bushing, oil it, then put it on the starter shaft. Then hoist the starter back up in there, and get it seated. Put the upper mounting bolt through and put the nut and washer on the lower mounting stud. Make sure that the upper bolt's half-moon shape is engaged properly with the.

Dec 15, Spray the bushing with penetrating oil. Grind down the tip of the tap smooth or it will cut into the bell housing. Or use a ball bearing of the correct size to run the tap against. Thread the tap in the full length of the bushing and strike the end of the 1901 Lynn MA to break the bushing free.

Then continue threading the tap in. Feb 21, Although a loose bushing may cause the starter to hang up with similar symptoms to the famous VW hard-start issue, the famous VW hard-start issue does exist for other reasons, too. I fixed a famous VW hard-start issue in the BobD (with certifiably fresh starter bushing) merely by cleaning trans/battery ground paths to sparklingly shiny + DeOx gel. Feb 01, To remove the old 12 Volt Starter Bushing, tap the old Bushing using a 7/16ths tap.

If the Bushing will not remove by pulling on the threaded tap, install a long bolt of the same threads, place vise grips at the bolt head and use a hammer to tap on the nether side of the vise grips. This should loosen and remove the stumptrimmers.buzzted Reading Time: 1 min. Mar 06, The tool company SIR makes the proper tool, currently about 25, for starter bushing removal on all the VW/Porsche 12 volt cars.

It is SIR tool P, available from many sources.

Install the app.

D. donnhines New member. Mar 6, #5 Bushing puller, etc. THANK YOU, Capt. Mike, for this advice. I did not want to spring for a 35 special bushing puller that I.